Similar to any radio network, standard isolation would be required if equipment from different vendors are to be combined. Which including guard band, filtering as well as vertical/horizontal separation. In…
Here I write about selection of Base station antenna in LTE plan and other co-sitting equipment selection in LTE which will need to take care by Radio planning engineer during…
Here I write about some small topic for LTE network plan which including Call Model and Smartphone Penetration Growth Considerations, Scheduler Selection, Indoor Coverage Requirement and Cell Edge Throughput Requirement….
Radio planning engineers need to understand the existing operator’s network configuration as well as its footprint. This is particularly important before designing any network that requires commitment on KPIs later….
When you are planning for LTE network then two points also needs to take care frequency band reframing requirement and location of operator coverage requirement for LTE network. Let’s check…
Mobile (Portable) and fixed link between the proportion of the budget, there are four major Differences. The first difference between the fixed link will have a higher budget is usually…
Subscriber Types Subscriber Equipment may take different form factors. It may resemble alert 3G phones, or maybe a CPE device, or a device connected to a USB dongle or USB…
Margin sites intrusive noise levels due to an increase can be considered as If sites were spaced closer together than position using the same frequency The thermal noise floor. In…
Here I write down which point to tack care during antenna installation which including Wind load, Work Temperature and Humidity and Camouflaged Antenna Scheme for Sites Wind Load The antennas…
Here I write down some passive characteristics definition for antenna which include Port Isolation, Power capacity, Input Port of Antenna, Passive Intermodulation (PIM) and Dimensions and Weight of Antenna. For…