The LTE link budget tool support the analysis for DL Traffic, UL Traffic, as well as signaling channel. Then the smallest radius is used as the final coverage radius based on the link balance principle. First of all I clear LTE Link budget tool just give you theoretical result practical result of LTE link budget … Read more
In any two-way radio system, the radio pathlosses and the equipment output powers and sensitivities must be taken into account for both directions. This is especially true in a mobile network (e.g. downlink: BS to UE and uplink: UE to BS), where there are different characteristics for the uplink and downlink paths. These include, for … Read more
The system designer will need to determine the specific RF link budget parameters to be used when designing the system. The following figure shows the typical gains and losses that are encountered in the RF path. An RF link budget must be determined for each sector of each site. The RF link budget for … Read more
An RF propagation model is a mathematical formula used to characterize the radio is Wave transmitter at one end and the other end into the receiver propagation between It is usually a path RF frequency, distance, antenna heights of the terrain, Clutter and other conditions. It’s all in the exact damage to telecommunication systems is … Read more
The table shows representative Link Downlink budget for 3G. Fluctuations in the signal can be represented by a scale and small effects such models are typically used for external circulation. Indoor shadowing results in a large-scale signal change, which may be represented by a log-normal distribution in a manner similar to 3G macro propagation model … Read more