Tag: uplink

Means for transmitting UE In order to avoid signaling of the radio access capability of the UE via an air interface at each transition from RRC_IDLE to RRC_CONNECTED, the core…

Depending on the type of measurement, the UE can measure and report any of the following: serving cell; list of cells (e.g., cells shown as part of the object of…

The E-UTRAN can configure the UE to report measurement information to support the control of UE mobility. The following measurement configuration elements can be signaled via the RRC Connection Reconfiguration…

Here I write some small notes on connection Re-Establishment procedure in LTE. In a number of cases of failure (eg failure of radio link failure of teaching RLC unrecoverable error,…

Which step to make clear before select any site at any location like equipment type, construction and link balance calculation which describe detail as below. Select Equipment Type For Site…

Both the power control and the DTX are standard GSM features, which are designed to minimize the interfering transmission when possible. They are both mandatory features in the mobile terminals,…

Cyclic vs. Random Hopping Sequences Both cyclic and random hopping modes are available in GSM. In the cyclic mode the frequencies are changed sequentially from the lowest frequency to the…

In GSM System Losses is different type here i write about Losses by Duplexer, Body And Penetration Duplexer Loss A duplexer enables simultaneous transmission and reception of signals on the…

Gain is most important thing in wireless communication and if its passive then it will be very useful here I write about antenna gain and diversity gain definition and its…

When we talk about GSM Rf planning then first thing into mind is Link Budget,here i write about why link Budget analysis in GSM Link budget analysis provides: Coverage design…