How UE select suitable cell in LTE
How UE select suitable cell in LTE Here write in simple words how UE select suitable cell in LTE. After the UE has selected a PLMN, is a done selecting…
Telecom Techniques Guide
lte
How UE select suitable cell in LTE Here write in simple words how UE select suitable cell in LTE. After the UE has selected a PLMN, is a done selecting…
LTE NETWORK ARCHITECTURE OVERVIEW The Long-Term Evolution (LTE) network architecture is a crucial component of modern wireless communication systems. In this overview, we will delve into the key aspects of…
Resource Block & Physical Resource Block in LTE What is Resource block in lte? :- A resource block is the smallest unit of resources which allocated to a user. The…
Synchronization & BCH for TDD Frame in LTE Synchronization: Purpose: Achieves alignment between the base station (eNodeB) and User Equipment (UE) in LTE Time-Division Duplex (TDD) frames. Methods: Time synchronization…
Inter-Symbol Interference in LTE Definition: ISI is a phenomenon in LTE where symbols transmitted over a communication channel overlap, causing distortion in the received signal. Causes: Multipath Propagation: Signals take…
Different Categories of UE in LTE Categories of UE in LTE is divided by its function which is as per below. Functionality: eNB obtains the UE radio capabilities via: •…
Benefits of SC-FDMA Receiver in LTE Low Peak-to-Average Power Ratio (PAPR): SC-FDMA (Single-Carrier Frequency Division Multiple Access) exhibits a lower PAPR compared to other modulation schemes, reducing the demand for…
Basic Function of Uplink & Downlink Transport Channel in LTE Uplink Transport Channel: Purpose: Facilitates the transmission of user data from the User Equipment (UE) to the eNodeB (base station)….
LTE TCP Throughput vs Round Trip Time (RTT) In Long-Term Evolution (LTE) networks, the relationship between TCP throughput and Round Trip Time (RTT) is a critical factor influencing the performance…
Which Cell Parameters needs to Obtain in LTE? To provide the most critical information to the UEs, the eNodeB uses the BCH channel The information is sent on pre-defined time-frequency…