Different Tasks and States of RRC Protocol in LTE-EUTRAN
Different Tasks and States of RRC Protocol in LTE-EUTRAN The RRC protocol for EUTRAN is responsible for the basic configuration of the radio protocol stack. But one should note, that…
Tag: RRC states for EUTRAN
How UTRAN Terrestrial Interface Protocol Mode – UTRAN layers and planes
The structure is based on the principle that the layers and planes are logically independent of each other. Protocol structures in UTRAN terrestrial interfaces are designed according to the same…
Closed Loop Mode Transmit Diversity in UMTS
UMTS Closed Loop Mode Transmit Diversity Used in DPCH and HS-PDSCH. The closed-loop-mode transmit diversity can only be applied to the UMTS downlink channel if there is an associated UMTS…
UE information transfer and RRC connection Aspects in LTE
Means for transmitting UE In order to avoid signaling of the radio access capability of the UE via an air interface at each transition from RRC_IDLE to RRC_CONNECTED, the core…
How Measurement Configuration in EUTRAN
The E-UTRAN can configure the UE to report measurement information to support the control of UE mobility. The following measurement configuration elements can be signaled via the RRC Connection Reconfiguration…
3GPP Services Classification and EUTRAN Capacity Limiting Factors
Here I write on 3GPP Services Classification and EUTRAN Capacity Limiting Factors for LTE. 3GPP Services Classification Being a data centric technology, LTE has well defined classifications for Quality of…