Author: Teletopix

Radio Protocol Architecture in LTE The EUTRAN radio protocol model specifies the protocols terminated between UE and eNB. The protocol stack follows the standard guidelines for radio protocol architectures (ITU-R…

Different Tasks and States of RRC Protocol in LTE-EUTRAN The RRC protocol for EUTRAN is responsible for the basic configuration of the radio protocol stack. But one should note, that…

Authentication and Access Control in Wimax Access control is the security mechanism to ensure that only valid users are allowed access to the network. In the most general terms, an…

Physical Channel Types of LTE The physical layer uses resource blocks to transmit binary coded information in QPKS, 16QAM or 64QAM or OOK modulation form. Physical channels determine how data…

How Transport Channel Processing in LTE? Transport channels are block oriented transmission services and transmit one or more transport blocks per transmission time interval (TTI). The TTI is 1 ms…

QoS Mechanisms in Packet Networks There are Three Types of QoS Mechanisms in Packet Networks. Control Plane Mechanisms Data Plane Mechanisms Its Tradeoffs Control Plane Mechanisms Such mechanisms include QoS…

Layer and channel relationship in LTE The radio interface is composed of different layers in order to set up, reconfigure and release the radio bearer services. The protocol layer is…

Synchronization in LTE Mobile "Switch On" Primary and Secondary Synchronization Signals occupy 2 blocks of symbols per 10 ms (central 72 subcarriers for all channel bandwidths). An example is shown…

PLMN selection in "IDEL Mode" for LTE-UE When an UE is switched on, it attempts to make contact with a PLMN. The selection of the PLMN could be either automatically…

Uplink Power Control Calculation in LTE Transmit power of PUSCH in subframe i is defined by PPUSCH (i) = min{PMAX,10 log10 (MPUSCH (i)) + PO_PUSCH ( j) +α ( j)…