Tag Archives: protocol

WCDMA Source Coding

AMR (Adaptive Multi-Rate) Speech A integrated speech codec with 8 source rates The AMR bit rates can be controlled by the RAN depending on the system load and quality of the speech connections Video Phone Service H.324 is used for…

DL & UL Physical Channel in LTE

How Physical channel of LTE works in UL & DL?A distinction has to made between:  The Physical channel The Physical signal The DL physical channels are: Physical DL Shared Channel (PDSCH) It is a shared channel used to carry user…

From the Transport to the Physical Channel in LTE

Transport channels are then mapped on the physical channels which are sent over the air interface A CRC is calculated and appended to each TB. It allows the receiver to detect errors. It is used by retransmission mechanisms like H-ARQ…

How Transport Channel Work in LTE?

A transport channel defines how and with what characteristics the information is transmitted. Inherited from the WCDMA, data on the transport channel is organized into “Transport Blocks”, TBs. A Transport block can be transmitted every TTI = 1 ms The…

How Many Logical Channel in LTE ?

The following control logical channels have been defined by the 3GPP: BCCH, Broadcast Control Channel, used for the transmission of system control information. A UE needs to decode it before requesting a connection. PCCH, Paging Control Channel, is a downlink…

How Channel Architecture in LTE?

A Logical Channel is defined by the type of information it carries. Logical channels are classified into control and traffic channels. Answer to the question: what is it being transported? A Transport Channel is defined by how and with what…

How MAC Protocol Work In LTE?

The MAC protocol provides the following services: Logical Channel to Transport channel mapping Scheduling: There is no dedicated channel allocated to a UE. Time and frequency resources are dynamically shared between the users in DL and UL. The scheduler is…

Radio Link Control (RLC) protocol services in LTE

The Radio Link Control (RLC) protocol provides the following services: Segmentation of SDU according to the size Re-Segmentation of PDU Radio Bearer to logical channel mapping Transfer of data in 3 modes: TM Transparent Mode Without retransmission. For real-time service.…

LTE Network and Protocol Architecture

LTE/SAE network architecture EPC -Evolved Packet Core Base Station control plane and user plane protocol stacks EPC protocol stacks  

lub Interface in 3G WCDMA

The 3G Iub interface is the terrestrial interface between NodeB and RNC. The Radio Network Layer defines procedures related to the operation of the WCDMA NodeB. The Transport Network Layer defines procedures for establishing physical connections between the 3G NodeB…

How UTRAN Terrestrial Interface Protocol Mode – UTRAN layers and planes

The structure is based on the principle that the layers and planes are logically independent of each other. Protocol structures in UTRAN terrestrial interfaces are designed according to the same general protocol model. This model is shown in below. The…

Radio Protocol Architecture in LTE

The EUTRAN radio protocol model specifies the protocols terminated between UE and eNB. The protocol stack follows the standard guidelines for radio protocol architectures (ITU-R M1035) and is thus quite similar to the WCDMA protocol stack of UMTS. The protocol…