Home / lte eutran

How Measurement Configuration in EUTRAN

The E-UTRAN can configure the UE to report measurement information to support the control of UE mobility. The following measurement configuration elements can be signaled via the RRC Connection Reconfiguration message. E-UTRAN may configure the UE to report measurement information to support the control elements mobility. Following measurement configuration message can be supplied via the … Read more

Definition of EUTRAN Capacity Limiting Factors for LTE

Here I write not all but important List of EUTRAN Capacity Limiting Factors for LTE and its definition. Impact of Interference on Capacity Interference is always a main contributor to capacity degradation in 1G to 3G cellular network and LTE is no difference. Besides external interference, there is a strong relationship also between the number … Read more

Definition of Front to Back Ratio for LTE antenna

Front to back ratio is an important characteristic of directional antenna antenna. Is the ratio of power radiated from a corner with maximum radiation radiation levels at 180 degrees (the back of) from that point. Front to back the ratio is usually expressed in terms of dB, i.e. the signal at the rear of the … Read more