In 2G GSM Technology in forward direction Downlink (GSM BTS to GSM Mobile). There are mainly five Downlink Logical Channel in GSM. Frequency correction channel (FCCH) Synchronous channel (SCH) Broadcast control channel (BCCH) Paging channel (PCH) Access granted channel (AGCH) Frequency correction channel (FCCH) First start with FCCH which full form is frequency correction channel … Read more
lets talk about LTE Architecture- SERVICE, EPC, E-UTRAN and User Equipment. In the LTE network is divided into 2 basic networks, namely: 1. EUTRAN (Evolved Universal Terrestrial Radio Access Network) 2. EPC (Evolved Packet Core) SERVICE IP Multimedia Subsystem (IMS) is a good example of cars that can be used in the service layer connectivity Services … Read more
EPC ( Evolved Universal Terrestrial Radio Access Network) Functionally the EPC is equivalent to the packet switched domain of the existing 3GPP networks. EPC consist of:–MME (Mobility Management Entity)–SAE GW represents the combination of the two gateways , Serving Gateway(S-GW) and Packet Data Network Gateway (P-GW)–Home Subscriber Server (HSS)–Policy and Charging Rules Function (PCRF) Mobility … Read more
A parallel 3GPP R8 project to LTE and SAE is the Evolved High Speed Packet Access, eHSPA, project (also referred to as HSPA+). The proposed eHSPA features represent a logical evolution from today’s HSDPA and HSUPA systems. Roughly speaking, the eHSPA project focuses on three areas: • Optimising HSPA for real-time packet data services, like … Read more
The uppermost evolution track shown in Figure is that developed in the 3rd Generation Partnership Project (3GPP), which is currently the dominant standards development group for mobile radio systems and is described in more detail below. Within the 3GPP evolution track, three multiple access technologies are evident: the ‘Second Generation’ GSM/GPRS/EDGE family1 was based on … Read more
PN Code Generation PN Code Generation PN codes are generated from prime polynomials using modulo 2 arithmetic. The state machines generating these codes are very simple and consist of shift registers and XOR gates . Masking will cause the generator to produce the same sequence, but offset in time PN Offset (Masking) Masking … Read more
As shown above, CCCH=PCH+RACH+AGCH; downlink CCCH=PCH+AGCH; and uplink CCCH=RACH. In the above combinations, combination 3 and 4 must be allocated to slot 0 of the BCCH carrier configured for the cell; while combination 5 must be allocated to timeslots 2, 4 and 6 of the BCCH carrier. The FACCH works in the frame stealing mode, … Read more
1. Random access channel (RACH) It is an uplink channel used for MS randomly access to network by requesting for an SDCCH. The request includes a 3bit setup reason (call request, paging response, location update request and short message request etc.) and a 5bit random reference number for MS to differentiate the access granted messages. … Read more
As we know, every cell has several TRX and every TRX includes 8 timeslots (i.e. providing 8 basic physical channels). In the radio subsystem, the physical channel supports the logical channel based on the type of message transmitted . In this way, the physical channels are mapped as different logical channels. In the GSM system, … Read more
Actually, during the communication process, the mobile subscriber talks only 40% of the time and there is not much useful information transmitted during rest of the time. If all the information is transmitted to the network, it will not only be a waste of the system resources but also add more interference to the system. … Read more