What is MNC and MCC for GSM MCC MNC – Telecom What is mcc and mnc :- Both are very first question in your mind when you start learning on telecom its basic behind numbering system in telecom lets understand each one in details. MNC full form in telecom : Mobile Network Code. MCC full form in telecom … Read more
In GSM, the Network Identity Parameter CGI (Cell Global Identity) is a code that uniquely identifies a specific cell in a mobile network. It comprises the Mobile Country Code (MCC), Mobile Network Code (MNC), Location Area Code (LAC), and Cell Identity (CI). The CGI helps in identifying and differentiating cells within a GSM network, facilitating … Read more
How 26 and 51 Multiframes in GSM GSM is very complicated when we talk about its rf side and in it very complicated to understand the structure of 26 and 51 Multiframes, here my try to make you understand simply. The 26-frame Traffic Channel Multiframe in GSM The Below Figure shows the time relationship between … Read more
What is Burst in GSM and Burst Types in GSM The Below a GSM burst. It consists of several different elements. These elements are as below: This is the area in which the speech, data or control information is held. Side effects Guard Period The BTS and MS can only receive the burst and decode … Read more
Timing Advance in GSM Transmission delay is unavoidable in the radio interface. If the mobile station moves away from the base station during a call, the further distance the more delay. The uplink is as the same. If the delay is too high, the timeslots of the signal from a certain mobile station and that … Read more
What is Use of LAC in GSM Location Area Code（LAC) : To locate the location of MS, the whole area covered by each GSM PLMN is divided into different location areas. LAC is used to identify different location areas. LAI contains LAC, which is composed of two bytes. LAC adopts hexadecimal coding. The available range … Read more
GSM Underlaid Overlaid Frequency Allocation and Configuration Underlaid Overlaid Frequency Allocation In the Overlaid/Underlaid technology, all frequency carriers in the cell are divided into two parts, of which the TRX power of some frequency carriers is lowered, then two Overlaid/Underlaid with different coverage appear, as shown in the below figure. The frequency carriers used by … Read more
Requirement for Interference and Carrier to Interference Ratio in GSM GSM is an interference restricted system. Carrier-to-interference ratio (C/I), also called interference protection ratio, refers to the ratio of all useful signals to all useless signals. In GSM system, this ratio is relevant to the instantaneous location and time of MS due to irregular landform, … Read more
Basic of GSM Um,Abis and A Interface GSM (Um) Air Interface This is the interface between the GSM mobile station and the GSM Base station. The Air interface (RF Interface) uses the Time Division Multiple Access (TDMA) technique to transmit and receive traffic and signaling information between the GSM BTS and GSM Mobile Station. The … Read more
As From the Name VLR means Visitor Location Register and HLR means Home Location Register so HLR having all detail of subscriber and VLR having temporary details for mainly call processing related. Let’s check in detail HLR and VLR in Function in telecom. Hlr and Vlr in Mobile Communication Home Location Register (HLR) – Main … Read more