Tag Archives: BCCH


Physical Combination of Logical Channel in GSM

As shown above, CCCH=PCH+RACH+AGCH; downlink CCCH=PCH+AGCH; and uplink CCCH=RACH. In the above combinations, combination 3 and 4 must be allocated to slot 0 of the BCCH carrier configured for the

Uplink Logical Channel in GSM

1. Random access channel (RACH) It is an uplink channel used for MS randomly access to network by requesting for an SDCCH. The request includes a 3bit setup reason (call

Logical Channel Type in GSM

As we know, every cell has several TRX and every TRX includes 8 timeslots (i.e. providing 8 basic physical channels). In the radio subsystem, the physical channel supports the logical

How 26 and 51 Multiframes in GSM

GSM is very complicated when we talk about its rf side and in it very complicated to understand the structure of 26 and 51 Multiframes, here my try to make

Evaluation process for Cell selection in LTE

S-CRITERION The cell selection criterion S is a pre-condition for suitable cells. The conditions for E-UTRAN, UTRAN FDD and GSM cells are listed in the figure. R – CRITERION –

Logical Channel Types of LTE

Logical channels are in a one-to-one fashion associated with radio bearers. Logical channel types are used to distinguish the type of information transmitted within the attached radio bearer. The two

Transport Channel Types of LTE

Transport channels are used as the basic transmission service offered by layer 1 to MAC. MAC will use transport channels to multiplex and demultiplex logical channels onto and from them.

What is Principle for Frequency Planning in GSM

The actual frequency planning of certain areas is usually conducted with such areas divided into segments geographically, i.e., first divide a complex network into small networks. However, there should be

How 1x 3 or 1x1Reuse Patterns in Frequency Planing

Isolated reuse technology refers to 1*3 or 1*1 reuse with short reuse distance and severe interferences, radio frequency hopping technology has to be adopted. The aggregate of hopping frequencies needs

Multi layer Frequency Reuse Pattern in GSM

Multi-layer reuse pattern technology means to divide the whole frequency resources into different subgroups according to specific principles. Each subgroup allocates frequency carriers to every cell by means of different